-DIY headlight restoration kit is designed to eliminate the worst cases of the headlight degradation, yellowing, oxidation, and scratches from your headlights. The kit includes a backer pad with an adapter that allows for machine buffing in order to restore the cloudiest lenses. Get great results on most plastic lenses, such as tail lights, trailers, boat windows, helmet visors, motorcycle windscreens, snowmobiles and more.
--Designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazy.
--Headlight lens restoration kit improves the performance of the headlight.
--Three easy steps:sand, polish, and protect.
--Easier than replacing an old headlight.
--Comes with easy-to-use instructions.
--Car headlight restoration kit does not include household drill.
--Restores headlights, taillights, fog lights or directional lights.
--This kit is intended to restore 2 headlights.
--2*P800 Sanding Discs
--2*P1200 Sanding Discs
--2*P2000 Sanding Discs
--1*Orange Sponge Disc
--2*40gm Polish Paste
--2*3.0ml Protect Liquid
--1*Backer pad M10 thread
--1*White Sponge Disc
How To Use
Prepare: Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.
Two ways for choose:
Manual or Machine
(Machine polishing will generally yield better results.)
Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.
Note:Use the sand discs from coarse to fine:P800-->P1200-->P2000. Not doing so will result in restoration failure.
Attach the orange sponge disc to the backer pad and apply the polish past. Polish the lens until the shine is restored to its original condition.
Note:For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Clean the headlight lens and make sure the lens is dry before continuing this step. Make sure the headlight is not under direct sunlight (VERY IMPORTANT). Using the white sponge disc provided in the kit, evenly apply a layer of the protective liquid on the surface of the lens. Allow the protective liquid to sit and dry for 15 minutes. Then, allow the liquid to cure in direct sunlight for 1 to 2 hours.
After step 3, keep the lens dry and do not allow it to be exposed to moisture. Do not wash the car for 24 hours.
NOTICE: How to apply UV Protective Paste ?
In a cool shade , using UV Protective Paste to polish headlight surface with white sponge gently toward a direction of smearing until the varnish is evenly coated on the lamp surface. Set it aside for 15 minutes 10-15min (time control is very important ),then the car moved under the sun (exposure above 2 hours)
1.May cause eye and skin irritation.
2.Keep out of reach on children.
Products shall be ideally stored in a cool ,dry location in unopened containers at a temperature between 8-28 degree c ( 46 to 82F) unless otherwise labeled.